A-1106 Front Yoke, Transfer Case Output, fits 1941-1979 Jeep & Willys with Dana Spicer 18, 20 Transfer Case by Crown
Product Description
For Driveshaft Universal Joint, 3.2" Cap to Cap
This Part Fits The Following:
Jeep CJ-2A (1945-1949) w/ Dana 18 Transfer Case; Front Output.
Jeep CJ-3A (1948-1953) w/ Dana 18 Transfer Case; Front Output.
Jeep CJ-3B (1953-1968) w/ Dana 18 Transfer Case; Front Output.
Jeep CJ-5 (1955-1971) w/ Dana 18 Transfer Case; Front Output.
Jeep CJ-5 (1972-1979) w/ Dana 20 Transfer Case; Front or Rear Output.
Jeep CJ-6 (1955-1971) w/ Dana 18 Transfer Case; Front Output.
Jeep CJ-6 (1972-1975) w/ Dana 20 Transfer Case; Front or Rear Output.
Jeep CJ-7 (1976-1979) w/ Dana 20 Transfer Case; Front or Rear Output.
Jeep CJ-7 (1976-1979) w/ Quadra-Trac Transfer Case; Front Output.
Jeep C101 Commando (1966-1971) w/ Dana 20 Transfer Case; Front or Rear Output.
Jeep C104 Commando (1972-1973) w/ Dana 20 Transfer Case; Front or Rear Output.
Jeep SJ & J-Series (1962-1979) w/ Dana 20 Transfer Case; Front or Rear Output.
Jeep SJ & J-Series (1973-1979) w/ Quadra-Trac Transfer Case; Front or Rear Output.
Jeep FC-150 (1956-1964) w/ Dana 18 Transfer Case; Front or Rear Output.
Jeep Pickup (1947-1965) w/ Dana 18 Transfer Case; Front or Rear Output.
Jeep Station Wagon (1949-1964) w/ Dana 18 Transfer Case; Front or Rear Output.
Jeep Sedan Delivery (1949-1963) w/ Dana 18 Transfer Case; Front or Rear Output.
10 Splines with Slinger; U-Bolt Type.
With over 9,000 different parts in stock for Jeep® vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep® vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Omix also offers an exclusive line of component kits and accessory products.
Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
